Have you ever thought of added-value of your life? Sounds MBA-"jargony"? I agree.. but it is a nice point.
I was watching a movie - The wonderful life - which talks about how the world woudl be if a person was not born. In this movie, the protoganist plans of committing suicide becuase his company is going to go bankrupt. An angel comes down to show him how valuable his life is and the way he does that is pretty enlightening - he shows the world -how the present would have been if he were not born. The people whose life he had saved or whom he had supported to do whatever they wanted to do were all leading miserable lives. The others whom these direct beneficiaries would have helped also were leading miserable lives ( see this is the tranistive property of maths; he was not there to help some x and that x was not capable of helping some y).... Also, the villain who wanted to acquire all the businesses in the town and monopolise the whole town ( impose high charges on the bus fares, high rents , etc.. ) had free hand to do whatever he wanted to as the protoganist was not there to lead the fight against him. Then, you and he realise the value of his life. So, the added value of his life woudl be something that if you take the world in which he exists and "subtract" from it a world which would exist if it were not there, that is the added value of his life.
If it is philosophical, ignore it! Let me illustrate through an example - Lets calculate the added value of McDonalds chain ( specifically Ray Kroc who started it ). Now, if there were no McDonalds chain, the whole fast food culture would probably not have come up, which implies people would have to spend at least $20 per meal. So, people in effect would pay $10 more if there were no McDonald. Note that there is still competition, but in a different form - the competition is from normal restaurants and not from food chains ( becuase say if McD were not there, the other chains would not exist). Now $300 M people ( population in US ) - assuming 1 in 10 people would eat in McDonald ( which is a very conservative estimate), $30 M people would be eating in McDonalds everyday. If McDonalds were not there, the $30 M people would be spending atleast $10 more. So, the value-addition of McDonald is $300 M. Sounds cool right?
Anyway, the two points that I wish to make are : One, the movie is awesome and a must watch for everyone. The second point, is every one needs to think about the added-value of their life - what difference are they making in this world and what would it have been if they were not born! The same thing applies to companies too - they need to bring some value addition to the consumers. (Now, the entire value addition that they bring in - they might be able to capture part of it only in the form of profits/revenues depending on the bargaining power and other factors), but immaterial of that , they are adding value to the consumers. Sounds ideal and theoretical? Not, not actually.
If you carefuully observe, this is what all the big companies have done.... More on this later...
Showing posts with label Business. Show all posts
Showing posts with label Business. Show all posts
Thursday, August 09, 2007
Ever thought of the added-value of your life?
Posted by
Nishkala
at
9:17 PM
4
comments
Labels: Business, Personal, Philosophy
Friday, February 17, 2006
Who makes what in Embedded Systems
A very good article by http://www.lightreading.com on "Who makes what in Embedded Systems" http://www.lightreading.com/document.asp?doc_id=81259&page_number=3. I have been longing to get such an exhaustive article. Finally got it. Will post my views later...
Posted by
Nishkala
at
10:34 PM
4
comments
Labels: Business
Wednesday, February 08, 2006
What an audacious move!
Wow.. is the only word that I can say at his guts and boldness. None other than Lakshmi Mittal. Trying to take over Arcelor, the second largest steel maker ( Please note: In capacity Arcelor is second to Mittal group, while in terms of revenues greater than Mittal's. ), with a market share more or less the same, scripting a new, but much needed trend in the steel industry is simply good.
Think of this: the world's three biggest iron ore producers (BHP Billiton,(BHP) CVRD & Rio Tinto (RTP)) control about 75% of production of steel's major raw material and the top 3 car companies have about 30% of global sales while the top 10, I think have about 20% of the total output of steel making them sandwiched between suppliers and car makers. Added to this, when the steel prices go down ( for various reasons because of increased supply at some parts or decrease in growth of construction etc... ) the smaller companies cannot reduce the supply soon while the bigger ones can. Hence, the smaller companies react by reducing prices in order to sell their inventory , ofcourse, incurring huge losses. Hence, the need for consolidation. Mittal was right to see the need as did Arcelor's Dolie. Infact, an analyst said, "we knew about Mittal's talks on consolidation and expected him to bid for a small-to-mid sized company, but not arcelor! We should have predicted!" True, we should have predicted.
Now, the next question? - why does Arcelor make sense for Mittal Steel?
1. Arcelor deals with high value steel while Mittal Steel is more on the low end steel. This is the reason why although Arcelor has higher revenues, it has lower capacities than Mittal Steel. The strengths are complementary. Mittal steel manufactures low end steel at developing nations and is a volume game more than the quality game. If mittal Steel can integrate Arcelor properly, it can diverge its production to Arcelor's manufacturing units, deliver high quality steel reducing costs and improving cost arbitrage.
2. The geographical location of Arcelor is complementary to Mittal Steel. Mittal Steel is concentraed around Asia, North America andwhile Arcelor is mostly into Europe. Arcelor's acquisition would give Mittal Steel a presence in almost all the major markets. If it had to improve its presence in Europe and other places, what is better than acquire small units and integrate all of them together into the mother unit? Buy a big unit which has till now grown by several acquisitions and has a good presence.. So easy to say, but so gutsy move!
Any negative points while acquiring Arcelor for Mittal Steel?
Arcelor is mainly into developing high quality steel in high cost developed countries ( in Europe ). This would, in my guess, be the major drawback for Mittal Steel. But again this is minor compared to Arcelor's brand image in Europe. If I were he, I would integrate Arcelor ( ofcourse if the deal happens, thats a big question ) just as it is, no lay offs nothing, synergise both of them, gain cost arbitrage, reduce costs, increase revenues, gain more customers because of the increased brand. Slowly, ( a few years later) move the backend manufacturing and technology of Arcelor to low cost developing nations. The front end of Arcelor would still remain in Europe - you see, you cannot take on governments of Europe especially in the steel domain . This would give you an ability to further increase revenues and decrease costs.
Think of this: the world's three biggest iron ore producers (BHP Billiton,(BHP) CVRD & Rio Tinto (RTP)) control about 75% of production of steel's major raw material and the top 3 car companies have about 30% of global sales while the top 10, I think have about 20% of the total output of steel making them sandwiched between suppliers and car makers. Added to this, when the steel prices go down ( for various reasons because of increased supply at some parts or decrease in growth of construction etc... ) the smaller companies cannot reduce the supply soon while the bigger ones can. Hence, the smaller companies react by reducing prices in order to sell their inventory , ofcourse, incurring huge losses. Hence, the need for consolidation. Mittal was right to see the need as did Arcelor's Dolie. Infact, an analyst said, "we knew about Mittal's talks on consolidation and expected him to bid for a small-to-mid sized company, but not arcelor! We should have predicted!" True, we should have predicted.
Now, the next question? - why does Arcelor make sense for Mittal Steel?
1. Arcelor deals with high value steel while Mittal Steel is more on the low end steel. This is the reason why although Arcelor has higher revenues, it has lower capacities than Mittal Steel. The strengths are complementary. Mittal steel manufactures low end steel at developing nations and is a volume game more than the quality game. If mittal Steel can integrate Arcelor properly, it can diverge its production to Arcelor's manufacturing units, deliver high quality steel reducing costs and improving cost arbitrage.
2. The geographical location of Arcelor is complementary to Mittal Steel. Mittal Steel is concentraed around Asia, North America and
Any negative points while acquiring Arcelor for Mittal Steel?
Arcelor is mainly into developing high quality steel in high cost developed countries ( in Europe ). This would, in my guess, be the major drawback for Mittal Steel. But again this is minor compared to Arcelor's brand image in Europe. If I were he, I would integrate Arcelor ( ofcourse if the deal happens, thats a big question ) just as it is, no lay offs nothing, synergise both of them, gain cost arbitrage, reduce costs, increase revenues, gain more customers because of the increased brand. Slowly, ( a few years later) move the backend manufacturing and technology of Arcelor to low cost developing nations. The front end of Arcelor would still remain in Europe - you see, you cannot take on governments of Europe especially in the steel domain . This would give you an ability to further increase revenues and decrease costs.
What are the possible challenges to this deal?
1. First, success of the merger itself is in a great question. I would guess Arcelor is worried about the same point - layoffs in the long term. Entire Europe ( the French government ) is so against the deal.
2. Till now, all the companies that were acquired by Mittal steel were running into losses. This, differently, is not so.
3.Also, all the recent acquisitions were related to the same business model vis, low cost units manufacturing low cost steel. Arcelor is a big challenge looked at from that angle.
These are some of the thoughts that came up while writing this article:
1. Can Mittal Steel be a role model to Indian IT Companies? Should Infosys, Wipro should make mid-sized acquisitions in Europe etc.. ? My advice would be that they do small sized acquisitions before making mid-sized acquisitions and build their strengths in merger and acquisition. Mittal Steel is very strong in acquisitions. It alwyas plays from the same strength.
2. What would be the next move of Mittal? If this deal gets finalised, hmm currently, integrate Arcelor. This would take a couple of years. Then think of another big company :) If this deal does not get finalised, then... hmmm, go for the next biggest company providing complementary strengths. Well, are there any? Good thing to think about when I have time..
Whatever happens, whether the deal succeeds or not - I am so happy, my steel stocks are going to rise. I did not know that steel runs in a commodity cycle and that was why investors are so afraid of it. I was just bothered about P/E values ( The P/E, an indicator of how priced the stock is relative to earnings). Initially, when I saw that Tata Metaliks had a very low P/E yet had great brand and clients, I thought I must have been lucky to find such a scrip so soon! Now, I know why I have been unlucky. Especially, with the news of China incraesing its supply to meet not only its demand but also export to other countries, all steel scrips have fallen down terribly. This news will definitely cheer up steel stocks.
Most importantly, it feels great to see that a first generation Indian Entrepreneur ( oh! alright business man ) could think of taking over a huge European behemoth :) Three cheers to Mittal.
Posted by
Nishkala
at
10:47 PM
3
comments
Labels: Business
Subscribe to:
Posts (Atom)